SnapSnap or tactile ratio is calculated by following formula: Snap = (F1-F2)/F1*100% | Snap | F 1 < 2.5 N | F 1 > 2.5 N | | weak | 30 % | 20 % | | medium | 40 % | 30 % | | good | 50 % | 40 % | | very high | 60 % | 50 % |
Not every combination of actuation force, stroke and snap is possible. The following table provides you a very rough overview of combinations:
|
| Snap | Act. force | Stroke | Low | Recommended | High | 1-0-2.0 | 1.20 | 15% | 40% | 60% | 1.40 | 35% | 50% | 65% | 1.60 | 55% | 60% | 70% | 2.0-3.0 | 1.20 | 20% | 35% | 40% | 1.40 | 20% | 40% | 50% | 1.60 | 30% | 50% | 60% | 3.0-4.0 | 1.40 | 15% | 25% | 30% | 1.60 | 30% | 35% | 40% | 1.80 | 40% | 45% | 50% | 4.0-5.0 | 1.40 | 10% | 15% | 20% | 1.60 | 25% | 30% | 35% | 1.80 | 35% | 40% | 45% |
You can adjust your Snap in increments of 5% for Customized Prototypes. |
